MSO7062TD – Osciloscopio Digital 2 Canales 60 MHz+ Analizador Lógico 16 Canales Owon

CARACTERÍSTICAS PRINCIPALES:

2 in 1 (DSO + LA)
+ 8 inch color LCD
+ USB data transmission supported
+ 20 automated measurements
Digital Storage Oscilloscope
+ Bandwidth : 60MHz
+ Sample rate : 1 GS/s
+ Auto-scale function

DESCARGAR MANUAL DESCARGAR FICHA TÉCNICA 

DESCARGAR SOFTWARE OSCILOSCOPIO DESCARGAR SOFTWARE ANALIZADOR

El osciloscopio y el analizador lógico de 16 canales admiten múltiples modos de disparo, incluidos bus, estado, alineación de datos, ancho de datos, trenza distribuida, etc.

FUNCIONES TÉCNICAS DEL OSCILOSCOPIO

Bandwidth 60MHz
Sample Rate 1GS/s
Rise Time =5.8ns
Display 8» color LCD , 640 x 480 pixels
Channel dual + external trigger
Horizontal Scale (s/div) 2ns/div – 100s/div, step by 1 – 2 – 5
DC Accuracy (average) average>16 : (3% reading + 0.05div) for ?V
Vertical Sensitivity 2mV/div – 10V/div
DC Gain Accuracy :3%
Vertical Resolution (A/D) 8 bits (2 channels simultaneously)
Interpolation sin(x)/x
Max Input Voltage 400V (DC + AC peak)
Probe Attenuation Factor 1X,10X,100X,1000X
Trigger Mode Edge, Video, Alternate, Pulse, and Slope
Acquisition Mode Normal, Peak Detect, and Average
Record Length 2M points
Waveform Storage 4 waveforms
Automatic Measurement
Vpp, Vavg, Vrms, Freq, Period, Vmax, Vmin, Vtop, Vbase, Vamp, Overshoot, Preshoot,
Rise Time, Fall Time, Delay A?B , Delay A?B , +Width, -Width, +Duty, -Duty
Waveform Math +, -, *, /, invert, FFT
Power Supply 100 – 240V AC, 50Hz / 60Hz, CAT II

FUNCIONES TÉCNICAS DEL ANALIZADOR LÓGICO

Sample Rate 20S/s – 1GS/s
Bandwidth 60MHz
Channel 16
Record Length 4M points
Input Impedance 660KO : 5%, in parallel with 15 : 5pF
Trigger Mode Edge, Bus, State, Data Alignment, Data Width, and Distributed Queue
Trigger Position Setting Pre-trigger, Mid-trigger, and Re-trigger
Threshold Voltage :6V (4 settings)
Input Signal Range :30V
Data Search available
Data System binary, decimal, and hex
Digital Filter 0, 1, 2 optional
Setting Storage 10 settings
USB Flash Disk Storage available

INCLUYE

– Cable de alimentación
– Cable USB
– CD Rom con el software
– Manual de usuario en español
– 2 Puntas de prueba x1:x10
-modulo de analizador lógico
-Bolso opcional